merci Advocatux
Posts made by shargar
-
Skype doesn't use my front camera on my tablett aquaris M10
Hello,
I'm with 16.04 (OTA 7). I start skype (8.40.0.70) from my webmail (hotmail) then i can see my contacts, I hear the speeches (skype askes me to use my micro), i can send pictures and text, but it doesn't find my camera... -
RE: failed to install ubport on my bq m10 hd
Thanks to Advocatux, Lakotaubp and Marathon for your help.
Take care -
RE: failed to install ubport on my bq m10 hd
Hi ! It's ok for me. I did it. I try to explain with my magic english. So, in my case, the problem was I started the flash_tool without sudo. I went to the tool's files and I wrote sudo ./flash_tool and let's go
Before I tried with modemmanager remove without sucess...
For french peoples : Attention l'outils flash_tool doit être lancé avec la commande sudo ./flash_tool dans un terminal. Avant, bien se place rdans le bon dossier avec la commande cd -
RE: failed to install ubport on my bq m10 hd
@advocatux. Yes, my tablet is in developer mode, usb debuging, and OEM unlocking.
My cable is ok, i see it with "sudo adb device".
To run the tool, I double click on it. I don't understand how to run it with sudo ? "sudo flash_tool" in a terminal ? -
RE: failed to install ubport on my bq m10 hd
ok , i folowed english instruction to be sure... ( https://docs.ubports.com/en/latest/userguide/install.html )
I press download in splash, i connect my device ( turn off) and i 've this message :
BROM ERROR : S_COM_PORT_OPEN_FAIL (1013)
[COM] Failed to open COM port.
[HINT]:I try with my different usb port without sucess...
The splash version is SP_Flash_Tool_exe_Linux_v5.1612.00.100
the
scatter loading file is MT 8163_Android_scatter.txt -
RE: failed to install ubport on my bq m10 hd
@advocatux This link is dead https://spflashtool.com/download/SP_Flash_Flash_Tool_v5.1744_Linux.zip>`_.
and this version doesn't sart https://spflashtool.com/download/SP_Flash_Tool_exe_Linux_64Bit_v5.1520.00.100.zip
I don't see other versions for linux ....
-
RE: failed to install ubport on my bq m10 hd
@advocatux Ok. I try to be careful. I'm downloading sp Flash tool for linux and the image and i will try tomorow. Thank you for your help. See you
-
RE: failed to install ubport on my bq m10 hd
@advocatux Thanks for your help. Ubuntu 16.04 LTS on my pc and android 6.0 on the tablett. I'm reading french instructions...
-
RE: failed to install ubport on my bq m10 hd
i don't find it on the bq's website. THere is just android versions : https://www.bq.com/pt/support/aquaris-m10/support-sheet?ssess=5b22d9f2ef452&sorigin=productList
-
failed to install ubport on my bq m10 hd
Re: Unable to install UBPorts on bq M10
Hello !
I try to switch an android tablett bq m10 hd. I folow this two methods ( MDT and with system image server) and i didn't succes. I have this message :
2018/06/14 22:42:24 Device is |cooler|
2018/06/14 22:42:24 Flashing version 10 from ubports-touch/legacy channel and server http://system-image.ubports.com to device cooler
81.93 KB / 101.97 MB [________________________________] 0.08 % 409.17 KB/s 4m14scan't flash recovery imageWait until it reboots on its own!
Do not reboot manually!Cleaning up..
Exiting magic-device-tool. Bye Bye
The android tablette is in developper mode and mode usb debuging.
Sorry for my english, i'm french...Have you any ideas for me ?
best regards
-
RE: to a nexus 5
@shargar Sorry it's ok !
I want go too fast... it's perfect , it's run .
Thank you so much for your help. -
RE: to a nexus 5
@UniSuperBox Hello and thank you for your answer. I'm sorry, I'm french and i don't understood the difference between "porting" and "support".
With your command "fastboot oem unlock" it's ok to unlock the secure boot !But i go to the ubport recovery menu...
I can choose 6 options :
Reboot systeme now
Ubuntu action
Android action...I made a mistake ?
-
to a nexus 5
Hello. I use this way https://devices.ubports.com/#/hammerhead (install using mdt). and i have this probleme
Flashing legacy channel
Creating filesystem with parameters:
Size: 734003200
Block size: 4096
Blocks per group: 32768
Inodes per group: 7472
Inode size: 256
Journal blocks: 2800
Label:
Blocks: 179200
Block groups: 6
Reserved block group size: 47
Created filesystem with 11/44832 inodes and 5813/179200 blocks
target reported max download size of 1073741824 bytes
erasing 'cache'...
FAILED (remote: not supported in locked device)
finished. total time: 0.094s
Creating filesystem with parameters:
Size: 13725835264
Block size: 4096
Blocks per group: 32768
Inodes per group: 8144
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 3351034
Block groups: 103
Reserved block group size: 823
Created filesystem with 11/838832 inodes and 93654/3351034 blocks
target reported max download size of 1073741824 bytes
erasing 'userdata'...
FAILED (remote: not supported in locked device)
finished. total time: 0.004s
rebooting into bootloader...
OKAY [ 0.033s]
finished. total time: 0.083s2017/11/03 21:08:16 Device is |hammerhead|
2017/11/03 21:08:16 Flashing version 42 from ubports-touch/legacy channel and server http://system-image.ubports.com to device hammerhead
can't flash recovery imageMove to your device to finish the setup.
Cleaning up..
Exiting magic-device-tool. Bye Bye
-
RE: OTA 3 suggestions: your wanted features
A good gps localisation to use openstreetmap (offline) on my bike !
-
RE: how to transfer contacts between an ota 15 version and ubport ?
@GIEMME Thanks for your message. I've try to use Telegram but when I select my contact list in my old phone to transfere it in my compte Telegram. A circle blue appear and loading and loading and loading... And nothing...and
-
how to transfer contacts between an ota 15 version and ubport ?
Hi ! I'm french and my english is very bad. So sorry about that. I had a meizu mx4 with ubuntutouch (OTA-15 the last version support by canonical). Today I buy a nexus 5 and i have install ubport on it. I have need to transfer my contacts on the new phone (the nexus). I try to found a way to process on the french net but I think it doesn't exist...
Can you help me ? please use easy words because my english is very very bad. For instance 30 mn to write this text !