@stanwood thank u very much
nice work
it worked verry well on redmi note 9 pro 😍

@GosuSan the Version 12.0.2.0 QJZMIXM Global Android 10 works 100% with Joyeuse!!! Please take this version. Attention it definitely depends on your region I am from Germany. It's not my fault that Xiaomi sometimes blocks versions of Android 10. The problem is then no telephony. Everything else actually works depending on your needs.

@Appointed said in Are rounded corners still not supported on RN9 Pro:

There is a YouTube video of Lomiri Plus V1.8.

It is a proof that it is possible to do much more than what we are currently being offered, but also evidence that someone has already done so.

Oh and by the way, this someone is, and that video is from @kugiigi

@ezze yes this is the best Firmware 12.0.2.0..

@MrT10001 I want to believe that the development is not easy. I also turned on my laptop to have a look. I'm still on Android because I don't have a second cell phone at the moment. UT is tempting me again to see what's possible. But you can even find Xenial and an Android 9Plus channel.

@developerbayman Yeah I figure that out a few days after the post. Thanks.

@developerbayman
It's normally linked to on device page.

Dear @MrT10001 and other UT Friends,

54). I unpacked the "excalibur_in_global_images_V12.0.3.0.QJXINXM_20210218.0000.00_10.0_in_d103044d71.tgz" and I checked that md5=d103044d71b3d4fa4b480d7fd6fa9e08.

55). I executed the flash_all.sh
$ ~/Downloads/excalibur_in_global_images_V12.0.3.0.QJXINXM_20210218.0000.00_10.0_in$ sh flash_all.sh

product: excalibur Erasing 'boot' OKAY [ 0.010s] Finished. Total time: 0.013s Sending 'xbl' (3562 KB) OKAY [ 0.126s] Writing 'xbl' OKAY [ 0.185s] Finished. Total time: 0.317s Sending 'xblbak' (3562 KB) OKAY [ 0.104s] Writing 'xblbak' OKAY [ 0.096s] Finished. Total time: 0.204s Sending 'xbl_config' (70 KB) OKAY [ 0.005s] Writing 'xbl_config' OKAY [ 0.006s] Finished. Total time: 0.016s Sending 'xbl_configbak' (70 KB) OKAY [ 0.004s] Writing 'xbl_configbak' OKAY [ 0.006s] Finished. Total time: 0.015s Sending 'imagefv' (20 KB) OKAY [ 0.005s] Writing 'imagefv' OKAY [ 0.001s] Finished. Total time: 0.010s Sending 'imagefvbak' (20 KB) OKAY [ 0.009s] Writing 'imagefvbak' OKAY [ 0.001s] Finished. Total time: 0.016s Sending 'aop' (159 KB) OKAY [ 0.010s] Writing 'aop' OKAY [ 0.002s] Finished. Total time: 0.016s Sending 'aopbak' (159 KB) OKAY [ 0.009s] Writing 'aopbak' OKAY [ 0.002s] Finished. Total time: 0.016s Sending 'uefisecapp' (123 KB) OKAY [ 0.007s] Writing 'uefisecapp' OKAY [ 0.002s] Finished. Total time: 0.026s Sending 'uefisecappbak' (123 KB) OKAY [ 0.008s] Writing 'uefisecappbak' OKAY [ 0.002s] Finished. Total time: 0.016s Sending 'qupfw' (52 KB) OKAY [ 0.008s] Writing 'qupfw' OKAY [ 0.001s] Finished. Total time: 0.015s Sending 'qupfwbak' (52 KB) OKAY [ 0.009s] Writing 'qupfwbak' OKAY [ 0.001s] Finished. Total time: 0.016s Sending 'metadata' (48 KB) OKAY [ 0.009s] Writing 'metadata' OKAY [ 0.001s] Finished. Total time: 0.015s Sending 'tz' (2919 KB) OKAY [ 0.079s] Writing 'tz' OKAY [ 0.011s] Finished. Total time: 0.095s Sending 'tzbak' (2919 KB) OKAY [ 0.080s] Writing 'tzbak' OKAY [ 0.011s] Finished. Total time: 0.095s Sending 'hyp' (386 KB) OKAY [ 0.020s] Writing 'hyp' OKAY [ 0.003s] Finished. Total time: 0.028s Sending 'hypbak' (386 KB) OKAY [ 0.017s] Writing 'hypbak' OKAY [ 0.005s] Finished. Total time: 0.027s Sending 'keymaster' (232 KB) OKAY [ 0.010s] Writing 'keymaster' OKAY [ 0.002s] Finished. Total time: 0.023s Sending 'keymasterbak' (232 KB) OKAY [ 0.008s] Writing 'keymasterbak' OKAY [ 0.003s] Finished. Total time: 0.016s Sending 'cmnlib' (388 KB) OKAY [ 0.017s] Writing 'cmnlib' OKAY [ 0.003s] Finished. Total time: 0.025s Sending 'cmnlibbak' (388 KB) OKAY [ 0.017s] Writing 'cmnlibbak' OKAY [ 0.002s] Finished. Total time: 0.025s Sending 'cmnlib64' (503 KB) OKAY [ 0.018s] Writing 'cmnlib64' OKAY [ 0.003s] Finished. Total time: 0.026s Sending 'cmnlib64bak' (503 KB) OKAY [ 0.016s] Writing 'cmnlib64bak' OKAY [ 0.003s] Finished. Total time: 0.025s Sending 'modem' (131084 KB) OKAY [ 3.841s] Writing 'modem' OKAY [ 0.627s] Finished. Total time: 4.473s Sending 'dsp' (32768 KB) OKAY [ 1.073s] Writing 'dsp' OKAY [ 0.122s] Finished. Total time: 1.201s Sending 'dspbak' (32768 KB) OKAY [ 1.056s] Writing 'dspbak' OKAY [ 0.119s] Finished. Total time: 1.181s Sending 'bluetooth' (892 KB) OKAY [ 0.037s] Writing 'bluetooth' OKAY [ 0.003s] Finished. Total time: 0.045s Sending 'bluetoothbak' (892 KB) OKAY [ 0.029s] Writing 'bluetoothbak' OKAY [ 0.008s] Finished. Total time: 0.043s Sending 'storsec' (20 KB) OKAY [ 0.011s] Writing 'storsec' OKAY [ 0.001s] Finished. Total time: 0.018s Sending 'devcfg' (42 KB) OKAY [ 0.010s] Writing 'devcfg' OKAY [ 0.001s] Finished. Total time: 0.017s Sending 'devcfgbak' (42 KB) OKAY [ 0.009s] Writing 'devcfgbak' OKAY [ 0.002s] Finished. Total time: 0.017s Sending 'abl' (204 KB) OKAY [ 0.010s] Writing 'abl' OKAY [ 0.002s] Finished. Total time: 0.017s Sending 'ablbak' (204 KB) OKAY [ 0.011s] Writing 'ablbak' OKAY [ 0.002s] Finished. Total time: 0.019s Sending 'dtbo' (8192 KB) OKAY [ 0.270s] Writing 'dtbo' OKAY [ 0.025s] Finished. Total time: 0.300s Sending 'vbmeta' (4 KB) OKAY [ 0.007s] Writing 'vbmeta' OKAY [ 0.001s] Finished. Total time: 0.014s Sending 'vbmetabak' (4 KB) OKAY [ 0.010s] Writing 'vbmetabak' OKAY [ 0.001s] Finished. Total time: 0.017s Sending 'recovery' (131072 KB) OKAY [ 4.310s] Writing 'recovery' OKAY [ 0.543s] Finished. Total time: 4.859s Sending sparse 'super' 1/7 (784676 KB) OKAY [ 25.613s] Writing 'super' OKAY [ 0.000s] Sending sparse 'super' 2/7 (785048 KB) OKAY [ 25.564s] Writing 'super' OKAY [ 0.000s] Sending sparse 'super' 3/7 (786360 KB) OKAY [ 25.394s] Writing 'super' OKAY [ 0.001s] Sending sparse 'super' 4/7 (777060 KB) OKAY [ 26.093s] Writing 'super' OKAY [ 0.000s] Sending sparse 'super' 5/7 (710432 KB) OKAY [ 21.993s] Writing 'super' OKAY [ 0.000s] Sending sparse 'super' 6/7 (785093 KB) OKAY [ 25.963s] Writing 'super' OKAY [ 0.001s] Sending sparse 'super' 7/7 (435084 KB) OKAY [ 14.702s] Writing 'super' OKAY [ 0.000s] Finished. Total time: 165.352s Sending 'vbmeta_system' (4 KB) OKAY [ 0.004s] Writing 'vbmeta_system' OKAY [ 0.001s] Finished. Total time: 4.598s Sending 'vbmeta_systembak' (4 KB) OKAY [ 0.009s] Writing 'vbmeta_systembak' OKAY [ 0.001s] Finished. Total time: 0.016s Sending 'cache' (152 KB) OKAY [ 0.009s] Writing 'cache' OKAY [ 0.002s] Finished. Total time: 0.027s Sending 'userdata' (300888 KB) OKAY [ 9.610s] Writing 'userdata' OKAY [ 0.000s] Finished. Total time: 9.616s Sending 'cust' (205060 KB) OKAY [ 5.956s] Writing 'cust' OKAY [ 0.000s] Finished. Total time: 7.505s Sending 'ffu' (7168 KB) OKAY [ 0.245s] Writing 'ffu' OKAY [ 0.038s] Finished. Total time: 1.104s Erasing 'misc' OKAY [ 0.009s] Finished. Total time: 0.013s Erasing 'apdp' OKAY [ 0.002s] Finished. Total time: 0.005s Sending 'boot' (131072 KB) OKAY [ 4.290s] Writing 'boot' OKAY [ 0.610s] Finished. Total time: 4.905s Rebooting OKAY [ 0.000s] Finished. Total time: 0.050s

55). "Redmi" appeared on the phone's screen.

56). "MIUI" appeared on the screen.

57). "MIUI 12" appeared > Settings > About phone > MIUI Global 12.0.3 Stable.

58). I suppose that now I'm ready for UT installation 🙂

Thank you for your Feedback/Patience/Hints and Kind Regards~~ Piotrek~~pe3no.

@stanwood Works like a charm. Thanks for this writeup.

@santanu said in Wireless display:

Wireless display not working,

What exactly have you tried and what exactly happened? Please make it easier for people to help you.

Issue with GPS,

What is the issue? Apart from not having A-GPS, as noted on the device page.

important application libreoffice is missing in Ubuntu touch.

That's true. It's a phone, not a PC, and the applications are different ones than on a desktop OS.
If you feel you need a word processing application, maybe try installing AbiWord in Libertine.

@rzlvmp have you tried to remove the pre-filled APN ( swipe right ) and create a new one ?
A reboot is needed too iirc

Hello this Threads have Firmware for Miatool Redmi Note 9 Pro. You must first upgrade to Android 10 before Ubuntu Touch can be installed. V12.0.2.0 definitely works for the device. https://forums.ubports.com/topic/9611/redmi-note-9s-can-t-make-calls-even-going-back-to-stock?_=1715421919317&lang=de

@RAS Yes, those yaml files you mentioned are only read on boot, as you have found out already.

@Username112 Leave it for 5 minutes and start again.