Same question, just received my Nitrokey 3A mini (+ USB-C adapter) and hoping to use it in conjunction with Oneplus 3T.

@arubislander
Thank you for confirming. Too bad.

Hi all,

I got a Sounix USB-C Hub+ cable ('video converter' usb-c to hdmi, 4K*60Hz) the other day for a project. I thought I might as well try it with the Oneplus 3T (usb-c) to TV (hdmi) and see that working.

Unfortunately it did not, black screen. Was my reasoning to simple, expecting convergence just by connecting the device with a cable?

Thanks for any pointers as to how to set it up for convergence

Like @Mario-CH says, this issue is not limited to VP.

Same thing happened on my OP3T, thought it was fixed (https://forums.ubports.com/category/69/google-pixel-3a-3a-xl) but freezes keep coming and chances of lock-ups increasing when 3 or more apps have been opened simultaniously.

@arubislander Yes I believe I did follow a tutorial back then when it was clear the installer did not work properly for the device, but more likely it was me as a newbie to have caused the situation.

@arubislander said in Changing Oneplus 3T from RC to stable channel:

The only simple way to recover from this situation is to run the device through the installer again, but indeed unselecting / unticking the 'wipe data' checkbox when installing.

Does that imply I do not need to manually back up all dat now (like calender entries)? Just to be sure.... Using the installer and not wiping data sounds like the easiest way to have a proper installation again while data remains on the device.

@cliffcoggin
Thanks for confirming. There should be some kind of stand alone/non-cloud service tool for such trivial processes, but I can understand resources for it have not been made available for it yet. However, if we as a platform would like to see UBports going more mainstream the need for it seems obvious.

Hopefully there's an easy way and someone can point me in the right direction so I will again be able to enjoy my 3T - stable only that is -.

@domubpkm , @Moem
I would love to have a new install when new OTA is available, but I'm worried about contacts, calender (lot of entries) and sms.

When searching the forum I have not found an easy (and conclusive) way to store them externally and be able to import them after fresh install of UT without using cloud services. Afaik there's no manager to perform those tasks and since I'm not that good with terminal commands I'm quite hesitant. Has any of you have succesfully completed such a process?

@moem , @domubpkm

Thank you for the UBinstaller suggestion and reminder not to wipe data whilst being in the process. I was kind of expecting that one. Not feeling really comfortable going that route considering the initial installing process has been a real pita, just glad 'it works' as it is.

With the new OTA annouced for next week I realized I'd better switch back to stable. Looks like solving this via a quick fix has been wishfull thing on my part

On the positive side of things, a thorough new flash might finally solve the issues that have accumulated over the past months (or break it....) and a fresh start may be the better option.

When changing to stable channel I get stuck and probably overlooking something.

• dev mode enabled
• changing channel from RC to Stable
• Stable is ticked, but when going back it still says RC mode, despite that meanwile the system starts downloading
• The stable version (10) gets downloaded
• Option 'install' version 10 -> asking for reboot
• After reboot Recovery menu appears
• option: reboot system, apply update, factory setting, advanced
• after selecting 'apply update', options 'adb' and 'emulate' appear
• after selecting 'adb' two options appear: 'adb' (cannot be selected) and 'reboot system'
• so only option is 'reboot system', when doing so after reboot the Oneplus 3T is in RC channel again and back to square one again.

Any help/pointers how to change channel RC -> Stable would be appreciated. Thanks!

Could your issue with freezes be related to this thread reporting freezes/lock-ups?

Since last update of the app I noticed that some sources for my RSS feeds (uRsses / @darkeye ) do not load anymore. In uAdblock currently all 18 filters are applied.

Tried to search by domains in the filter overviews provided by the link in the post above (thanks @domubpkm ). Searching for a specific domain did not result in pin pointing the filter causing the blacklisting.

Looking for the best and easiest way to whitelist specific domains to allow them as exceptions to uAdblocker in order to allow them to be available in RSS feeds and Morph Browser.

Any pointers would be much appreciated. Thanks.

YES I believe they should

Trying to figure out what would be the significant benefits of the Volla 22 over a OnePlus 6T (8/128) running UT.

Assuming I will have it running UBports and not looking for trazillion megapixel camera options, both screens are > 400 ppi, what should make me walk away from the 6T that can be had at appr. €120 (used)? The 4500 mAH removable battery (6T=3700 mAH non-rem.)??

Not intending to bash the Volla 22 offer (earliest backer), however wouldn't a Pinephone pro (linux mainline kernel) be a more obvious choice when it comes to helping the Linux community push forward?

We have taken uAdblock for granted for years. We shouldn't have and know better now, it was only this close before it had to be shut down.

Many thanks to you and all involved for this second chance to keep this important application available to the community.

@fredldotme @StandUpMobile @domubpkm

For two days I have been testing this fix on RC and I couldn´t be happier. The daily lockups have gone and the OnePlus 3T is as snappy and smooth like when UT was first installed. Multitasking isn´t a problem either. Only had one freeze, I guess it was just me pushing the device to the limit.

Thanks a ton especially to @fredldotme for making me appreciate my device running UT again as it's supposed to.

@standupmobile
Thanks. I followed up on your advice and am now on RC 673 to check if daily lockups have gone and check for lagging in multitasking. Will report back after the weekend.

@fredldotme
Great! Thank you for letting me know. That's good news so thank you for sorting out this issue. I'm still on stable channel but I assume we'll notice with the next OTA?

@standupmobile
Is this problem solved? No more freezes?

@arubislander
Late response sorry about that. As @Moem said

Waiting for an official port/installer for the Lenovo FHD Plus tb-x606x that will not brick the device