子版面

  • This section is specifically useful for new contributors on the project

    7 主題
    1 貼文
    DiogoD
    This Category is for those starting to contribute for the UBports Project and Community. By contributing, we mean doing things like: coding quality assurance (testing, bug reporting and validation, etc...) translations app development and maintenance writing and validating technical documentation and user manuals UBports social media and marqueting etc... If you want to contribute in these ways or others and have questions about it, like how to get started, where can you find information, please leave your questions in this category and we will try to answer them the best we can.
  • Discuss and solve problems with other users

    90 主題
    645 貼文
    developerbaymanD
    @bearbobs sorry for the late reply its been busy with work...did you have to host the emulationstation?....because not sure how to host from within a clickable.....Iv seen the project before but have not really done anything with it....if it runs totally client side its do able....but if it needs hosting I don't think it can be done....the nes I'm working on is a heavily modded JavaScript emulator runs totally client side i added touch support fixed up the audio and added a lot of mapper support.....one big issue is the webview out of the box is....well lacking...if you load mario you will see black squares around the clouds and other sprites...not the emulator but the webview....
  • 133 主題
    933 貼文
    hankschwieH
    @Ken1971 Hi! After a few failed attempts trying to save the data of my waydroid installation I was able to solve it, but had to erase all the user data, and re-install everything I had running in the waydroid installation. 24.04 is not yet available for Fairphone 3, so its 20.04 I'm using.
  • Pixel 3a install complete but no operating system found?

    Solved
    13
    0 評價
    13 貼文
    732 瀏覽
    KeeperK
    @lakotaubp Upgraded fom the phone settings to 20.04 and working well. Many thanks for the help.
  • Cannot upload profile from ubports forum app

    Unsolved
    1
    0 評價
    1 貼文
    78 瀏覽
    尚無回覆
  • Stuck in Recovery Mode after installing UT on Sony Xperia X (suzu/F5121 & F5122)

    Solved
    5
    0 評價
    5 貼文
    353 瀏覽
    C
    @lduboeuf it helped me to know that you succeeded by installing again and again. I just let the installer run again, chose 16.04/stable (as i also tried before) and BINGO! I think i installed for about 20 times now...thank you everybody for spending time on open source. I might be back with further questions...
  • Help for the FX Pro1x

    Unsolved
    3
    2
    0 評價
    3 貼文
    247 瀏覽
    milky_pimmsM
    @Keneda Its a great phone, I hope UBPorts can pick up official support. Looks like it a basic phone & ssh terminal for now.
  • 此主題已被刪除!

    Unsolved
    1
    0 評價
    1 貼文
    6 瀏覽
    尚無回覆
  • Unable to flash ubuntu-touch: reboot to recovery

    已移動
    9
    0 評價
    9 貼文
    2k 瀏覽
    C
    @mrt10001 same as phkirz: Sony Xperia X (suzu/F5121 & F5122)
  • xiaomi poco x3 nfc

    Unsolved
    2
    0 評價
    2 貼文
    324 瀏覽
    KenedaK
    @phennix Hello and welcome on UBports forum, community help and talking about Ubuntu Touch Please be clearer about your question/problem
  • How do I set the system clock to 24-hour format?

    Solved
    4
    0 評價
    4 貼文
    326 瀏覽
    T
    @lakotaubp Sorry. The post in #design was meant for feedback, this was meant for finding help/as a guide for future users. I suppose they ended up seeming redundant.
  • What device and Firefox app?

    Unsolved
    14
    0 評價
    14 貼文
    1k 瀏覽
    LakotaubpL
    @ktatar156 You need to allow insecure apps in the google account for contacts to sync iirc and gmail accounts will work in dekko2 but need setting up in the app this is for 16.04.
  • Any mail app?

    Unsolved
    7
    0 評價
    7 貼文
    528 瀏覽
    IanI
    @ktatar156 I seem to remember reading on here somewhere that there is a now a problem adding gmail accounts to dekko2 due to security/authentication changes on the Google side of the fence. There might be a workaround, you will have to do a search for the details I'm afraid. Edit: I think I found the info you need, try this thread:- https://forums.ubports.com/topic/7874/can-t-create-gmail-account-in-dekko?_=1673008816411
  • How to know the kernel version of supported devices?

    已移動
    5
    0 評價
    5 貼文
    457 瀏覽
    Mario.CHM
    Hi @keneda, At the beginning, I didn't want to refer to UT devices, and just quickly looked at mine. I thought someone from the community would correct me, as usual. :beaming_face_with_smiling_eyes: Greetings Mario
  • Pixel 3a XL - AT&T?

    已移動 Solved
    8
    1 評價
    8 貼文
    464 瀏覽
    K
    @rocket2nfinity Yep, I live in North America.
  • Dekko 2 privacy

    已移動
    5
    0 評價
    5 貼文
    466 瀏覽
    Pulsar33P
    @rogier-oudshoorn : I don't need that Dekko2 checks my email every x minutes. I just need a mail client able to check "on demand" a few e-mail accounts in a safe way. It seems to me that this is what Dekko1 did. Dekko2 should have an option to run without all privileges ! This is the only thing that prevent me from switching definitively from Ubuntu Touch Canonical OTA-15 version (on my daily driver BQ E5) to Ubports OTA-24 (used only for testing on my second BQ E5). So sad ... BR Pulsar33
  • VPN works fine with IPV4 but IPV6 is still my original one

    Unsolved ipb4 nordvpn ipv6
    3
    0 評價
    3 貼文
    325 瀏覽
    M
    I have exactly the same after a setup with ProtonVPN. Is there a solution to unset the IPV6 address or also get a address via the VPN provider?
  • SSH lag when phone screen is off

    Unsolved
    9
    1 評價
    9 貼文
    519 瀏覽
    arubislanderA
    @raybiko Well, yes. This is a phone. The idea is to throttle as much as possible when the device is sleeping. Hence the repeated advice not to reason about your phone in the same way you reason about a raspberry pi, for instance. However, if battery life is not a concern for you, you could try disabling app suspension for the Terminal app in the Ubuntu Tweak Tool, available in the Open Store.
  • Strange Update…

    Solved
    3
    0 評價
    3 貼文
    281 瀏覽
    M
    @lakotaubp got it
  • Lg Nexus 5 Rear Camera Screen Black

    Unsolved
    7
    0 評價
    7 貼文
    558 瀏覽
    KenedaK
    @stropbu Just quit tested on my N5 and i can confirm i have issues with its camera. No all quite the same as you but there are. I have the rear camera working (preview and photos taken), but once, after manual focusing on a very bright part of my tv screen, app control just vanished. On front camera, preview is reverted, but photo that outputs is in right orientation (edit : just tested on my MX4, same behavior on front camera, maybe it's intended ?) Also i have what you describes, manual focusing with front camera just make buttons not working for some loooong seconds after focusing finished (capture button color stays gray instead of white during that time). Did not tested in OTA-23 and previous as it is my spare phone.
  • Good Office Program for LG Nexus 5?

    8
    0 評價
    8 貼文
    870 瀏覽
    Peter GammaP
    @noelflantier The discussion is old, and the problem not solved. Thank you for your great LightP Word Processor and we are very happy about it. We will test on our Pinephone with Ubports. We suffer since longer time that there is no office software which has a community on Linux phones which is happy about it. User reported that everything works with Libre Office on the Pinephone, but it is terribly laggish. Softmaker has their special application for Android. Maybe it works in an Anbox. But is Anbox not just Android on a Ubports, with the same disadvantages Android has? Someone reported to use AbiWord and Gnumeric instead of LibreOffice on the Pinephone.
  • teleports: support for QR login in telegram web?

    Unsolved
    4
    0 評價
    4 貼文
    347 瀏覽
    K
    @gandalf Best action for now is to log a feature request in the repo I think QR reading also needa to imrpove in UT. Apps that has it don't read QR codes that well. There's a built in QR code reader in focal though so maybe it'll improve. Apps can also maybe use it to scan codes instead of implementing within the app.
  • Customise UI to open in Horizontal ...

    6
    1
    0 評價
    6 貼文
    400 瀏覽
    K
    @lx_crawl No option to have desktop files or icons in the desktoo yet. That's not implemented yet. You can explore the command setprop. For example this command sets the interactive blur in Lomiri to false: setprop ubuntu.unity8.interactive_blur false