@rdl85 I was notified by email. Carrier can see what device you use, I guess? I think they only notified affected devices. My issue turned out to be device specific, not UT related. I use a Oneplus 5T, and the Telus network stopped supporting MMS on many older devices, mine included. Per Public Mobile forums, MMS wouldn't work with Android either on a Oneplus 5T, Iphone 5 and earlier, many other older Android phones. Freedom Mobile setup: Freedom has separate APNs for internet and MMS, which my phone seems to need for MMS and internet to function simultaneously. APNs loaded automatically on UT 20.04, so it all just worked right away. I had to do it manually on my device that still uses UT 16.04. Anyhow, it all works great, with standard lack of proper functionality of Group Messaging. In case needed: Internet APN: internet.freedommobile.ca MMS APN: mms.freedommobile.ca MMSC: http://mms.windmobile.ca Proxy: 74.115.197.70 Proxy Port: 8080 Note that Freedom uses other networks when outside their own coverage, with free roaming. UT has "Data Roaming" turned off by default. This must be switched on under Settings->Mobile for data to work outside the Freedom network.

haha, yaaaay thanks again @Keneda :raising_hands: Hopefully ive helped figure out some forum issues at the least then, ive wanted to join the forum for a long time but i've just been a bit shy, so its nice to know people are nice anyway :smiling_face_with_smiling_eyes: Hopefully the verify email / no email associated with my account issue can get resolved too once the admins take a look.

@Keneda I never had an issue with MMS on my Nexus 5 either. But when i upgraded to my Pixel 3a, which is roughly the same time as when i changed providers, the issues started. So i have 3 potential culprits. 1: the OS (MMS was fine on Xenial, not on Focal) 2: the hardware (MMS was fine on Nexus 5, not on Pixel 3a) 3: the network (MMS fine on Virgin Canada, not on Freedom Mobile) So the first i'm considering changing is #3. -Fizz

@AppLee said in Hide.me app on Volla Phone: My suspicion is that you're using a device that is still based on Xenial. That is mine too, reason why I mentioned and bolted "focal device", but I suspect it was not clear enough

@miloessence Switch device off. Hold home button and Volume down and press power to go into download mode. In download mode attach device to pc and run Odin. When seen in Odin, find the do not reboot and untick it. Flash the recovery (TWRP) through Odin. When complete, turn the device off. Unplug from PC. Then using the correct key combo, boot into TWRP. Sideload /e/OS from there. UT is nicer on this device.

@Ben_Ben Just adding a note that this might result in issues if you are not familiar with doing this, or make a typo. You might end up needing to reflash. Thanks to @arubislander and @moem for mentioning this.

@arubislander I uninstalled Webber some time ago and started to use simple browser bookmarks. The reason is, that you have to add every URL ((sub-)domain) a website might use. Otherwise there's a fallback to the browser which has no passwords (cookies) stored, keeps opening new tabs etc. which is an annoying behaviour. E.g. for eBay I had more than 20 URLs. And always another one came up (hard to catch due to forwarding) and I had a fallback to Morph again. To add a new URL I had to create the Webber-Shortcut again and add every single URL... If Webber was able to reopen a shortcut with all settings made, that would be a game changer (or didn't I just see that option?). I could revive this if your suggestion works, but I'm afraid you have to tell me how to add the user agent header and which one (maybe there are options in Webber. I have to install and check first)...

@YamiYukiSenpai What do you see when selecting Lomiri from the lockscreen? BTW, I chose gdm so I still use the default lockscreen where I just choose Lomiri from the bottom right button.

@clUB28 Ok, I will try and point you in the direction of sorting this out. Try this first. Open a terminal where your fastboot and adb drivers are, have the device in fastboot mode (the bootloader). The Pixel 3a has slots, slot a and slot b. In fastboot try this command: fastboot --set-active=a Then boot the device. If that fails, try: fastboot --set-active=b Then boot the device. If that fails, reinstall Android and start again. I have done the below on my Ubuntu machine as well as Windows 10 and 11. (Chrome Browser, not Chromium is required) You have to have the phone on the stated version of Android in the installer: PQ3B.190801.002 Link to this. Your bootloader has to be unlocked. Use the Android Flash Tool addon and Google Chrome to flash your device to the correct Android ROM - Choose the Flash link. It is the easiest way and clearest way if you have not done this before. Do this when installing the ROM (just before): Force flash all partitions - ticked Disable verification - ticked Disable verity - ticked It is in the menu on the Android Flash tool. This will stop the device hanging at the Google logo. Once You have installed Android and set it up, then go through the UT Installer procedure. If you are OK on the command line and you wish to try with out Chrome have the device connected in fastboot mode to the PC and download the Link ROM rather than the Flash, extract it, open a terminal in the folder and run the flash-all.sh,

@CatWithUT I have heard back from the person in charge of the backend of the Shop. The issue is definitely not on your end; it's caused by the Shop software being very old. It's being updated soon. In fact the migration has started and it's currently being tested. In other words, this issue should be resolved soon. Thanks for your patience!

@AppLee thank you cp config config.bak .It's my habit

@arubislander Very helpful information, thanks. I still got my Pinephone with my Pinephone keyboard. You never know if someone adapts LibreOffice for the Pinephone screen in 10 years from now. But next to it I went back to an Android phone with Softmaker Office. But then will buy also a Pixel 3a as a privacy phone with Ubuntu Touch, and also to get used to a Linux phone, since I am against Google products. Scrcpy is nice for my Android phone, but I am happy to have also a solution for the Pixel 3a.

@kuailexs Thank you

Now, I can also login with key and without password.

@Fuseteam tested on my FP4. The switch beetween headphones and speaker is automatic, music playing works well but when I have a call it switches back to phone speaker. I have to re-enter this commandline after reboot : pacmd load-module module-udev-detect

@Fizz maybe you could fill an issue on UTTT GitLab to "add a reset all settings to default button" ?

@MrT10001 I found the settings didn't work for me with up to date samsung phone. However changing the following to Apn type : default,supl,mms Having done that all working fine for me