@hannescam i can use it while in the waiting period
and i i wonder if it would be possible to unlock it without waiting

@mrt10001 Hello in airplane mode it does not restart thank you for this idea. It's not the wifi so it's the mobile network that bugs the phone. I tested the sim on my nexus 5 no worries it works. I redid an install without any additional application it does not change anything with or without the RC update. Waydroy restat the phone from time to time if I raise several times. Thanks to you

@arubislander
ok thank you

@katesfb Apologies for the late answer and you may have gotten this resolved by now. However, I'll respond just in case someone else might have the same question in the future.

From looking into this a bit further, they should be the same device, so yes, technically it should work. Just to be sure though, I recommend confirming this with the contributor of the Mi A2 to ensure compatibility.

@lepotototor said in Installation on poco m3 failed:

@nitanmarcel The poco m3 is build with halium 10 so I flash the recommended rom with android 10 and I use the latest recovery image of miui or the latest of TWRP ?

I cannot see what you are trying to achieve. If you use the installer and follow the instructions, you should get a good install. If you don't, it is best to install TWRP, wipe DATA, CACHE and SYSTEM, then reinstall stock (using the MiFlash tool, ensuring you DO NOT relock the bootloader) and then try again with the UT installer.

If UT won't install, you have to make sure (using TWRP) that the DATA partition is erased and formatted to EXT4 and NOT F2FS - this will decrypt the DATA partition and allow UT to see it when installing.

If UT still fails to install then the device may have had a revision upgrade and might have (annoyingly and unknown) changed hardware like a different manufactured eMMC, Screen, Camera etc, that may stop UT installing.

These are some observations where I have had installation issues across a lot of devices. I have avoided flashing devices in the list using the CLI if there is the Installer available for it as without the installer it generally has failed down to my lack of CLI and coding Fu. I have had moderate success with devices not on the installer using the CLI without bricking the device to the point of unusability, an example is the Moto E 2nd gen EXT1524 which seems to be OK(ish) with UT.

@audrew ADB is like a higher level of Fastboot. Basically ( please feel to correct me anyone) fastboot installs a boot image and a recovery image. The boot image allows UT to boot, but you usually have to manually boot to recovery. Once in recovery ADB is then working and the UT install will continue by pushing the UT files over it from the PC to the device.
A bad or incompatible USB cable will stop ADB from functioning so no UT install.
An encrypted data partition will stop an install and can be flagged as an ADB error, that is why you have to format the data partition to EXT4 and wipe it so it is decrypted.
If the partitions have been resized, usually by installing a non stock ROM such as Lineage OS, UT won't install and may give an ADB error.
A bad or USB 3 port may cause an ADB error.
A PC/laptop may cause an issue for various reasons, if UT won't install on Windows, try a Linux based machine or a MacOS based machine.
Try an older installer, the latest Ubports installer may be a bit buggy.
Also follow the installation instructions to the letter or the install usually fails. Try a different channel if the stable channel fails to install.

GSMarena POCO M3 review:

"The default 12MP photos from the main camera are superb for this class, especially when shot in such challenging weather conditions."

"High-resolution 48MP mode is available - but there is no point using it. The 48MP photos are upscaled from 12MP and don't look good."

1 + 2 => no need for 48MP mode in Ubuntu Touch so this thread can be marked as solved. 🙂

@shogunmchawa according to the specific page for your device the loudspeakers are not working for this port. Have you tried connecting earphones?
Waydroid is supposed to work according to the same page, have you tried with the Waydroid helper app?

@ahmedshah
Normally not.

Hey,
Does anyone knows whatbisbthebissue with the automatic broghtness?
As it seems that the proximity and light sensors are working, is hust missing repowerd configuration or is there othee issues with it?

Thank you

@nero355 Hello, you still have your Mi 9T on Sailfish? I really want to Install it... If you still on it I want to know your user experience with this OS? Many thanks.

Thanks for your ansers. The Redmi 7a has the codename Pine. There is an installation instruction on Youtube for Redmi 7a, but it is very long. Thanks for your detailed explanation. I will try the second video on Youtube which was also helpful. If got also a Poco F1 to flash, which I love for it s usb-c port and because of Joels port. I will definitely become a Ubports and Linux user because of the many Linux phones, Linux AsteroidOS watches and Linux Nano PCs which are available. The time is gone when you had to carry around a Laptop with Matlab for sensor data acquisition 👏 .

@fastracoon said in Porting to Redmi note 7 pro fail:

Anyone has an idea, or a suggestion please?

Android 12 Evolution X

Please go back to the right Stock MIUI Android ROM and then try to install Ubuntu Touch again! 😉

@thatbloke
Some questions :

Are you still using this phone with Ubuntu Touch ? Daily usage or just a toy to play around with ? Did you own the phone or did you buy a used one ?
If so, please give us some details like : Price/Age/Battery status/Overall condition of the phone. Any idea if there are any reliable replacement batteries available for this phone ?!

I have always been a fan of the Xiaomi Mi Mix models so having one as a daily device with Ubuntu Touch on it would be AWESOME!!! 😃

@markus66 I am running on a Poco F1, with OTA-20. Eight hours of very light use (no Bluetooth) reduces battery by 23 %, from 58 % to 35 %. Of course, such values differ due to different battery ages and different usage patterns.

If you gave up, you might try again because the Poco F1 is a very well supported device. BTW: Can we please have a device subcategory? 🙂

@lakotaubp Hello and thank you for respone . i've flashed halium with gsi version 10 , i think begonia for redmi note 8 pro is different hardware chipset amd e.t.c

@b3rt - it seems ADP/MTP is broken in all Halium 10 devices currently. There is no known schedule for fixing this.

Best regards,
Steve Berson

@arcylisz
It seems your device is not supported and needs a custom port.

There are several versions of Xiaomi note 9 and yours merlinnfc is different from the supported one merlin...
Maybe it can be forced to use the merlin port on your merlinnfc but I don't know how and I will advise to tread lightly if you don't know what you're doing.

Best of luck.

@bigmouth said in No SIM Card on Xiaomi Mi 8:

Dear readers, this is a solution for xiaomi-dipper devices only and doesn't suit all SIM absent problems so don't try it or at own risk

I've moved the thread to the subforum according to this.
Thanks for letting us know.