@oldbutndy said:

@Leroy_Linux
Running 24.04.1n (daily - but randomly doing the updates), MVNO USMobile > T-Mobile

Good to know. I'm running 24.04-1.2 stable and T-Mobile.

I misread your post. Somehow I interpreted the phone wasn't working well, but you clearly stated that it's just not a daily driver unless WiFi calling or native VOIP. (neither of which I've used... my requirements are just for the working phone which it has done well thus far). Thanks and sorry for my confusion. Hope you find a way to meet your requirements!

@rocket2nfinity

@rocket2nfinity said:

@Leroy_Linux We experimented with SIP in the dialer and it is capable of making and receiving VoIP calls. Audio routing needs troubleshooting as it could only either send or receive audio, not both. Also, it could stand to be integrated better so that it is prettier and the dial buttons show up during calls. Any help with that would be appreciated. We have a telegram group just for this subject.

Hi Rocket, was this intended for @oldbutndy ?

@oldbutndy

Yes, clarify for others is my goal as well. Nice that we (along with others here) are like minded in this way.

What carrier are you using? What version of Ubuntu Touch are you running?

@chaosmaou

T-Mobile works well for me. I tried Ting first, but had issues. I didn't bother to troubleshoot knowing from others that T-Mobile worked. So, I just switched and happy with the results.

Good luck!

@oldbutndy

I think we're in agreement. When I said Global I was referring to the firmware for the easy unlock. The 2 models of the OnePlus Nord N10 5g with the direct bootloader unlock (e.g not requiring OnePlus support to give you a token) are the BE2026 which from the Ubuntu Touch device page informs to apply the Global firmware Oxygen 10.5.7 and the BE2029 which informs to apply the EU firmware Oxygen 10.5.7 in order for Ubuntu Touch to work properly (Halium needs to interact with those specific firmware).

For this particular phone, other devices, for example BE2028 (T-Mobile) and another for Metro, are generally tied to a particular carrier initially, require unlock token from vendor support regardless if Global or EU firmware is applied directly to the device.

@rocket2nfinity

Thanks for all the helpful knowledge and suggestions you've provided all over the forums. I've learned so much.

Just an update. I recently tried to unlock a OnePlus Nord N10 5g phone. Unfortunately, OnePlus didn't give me an unlock token and I tried the recommendation of using oppo decrypt/encrypt to use the Global BE2026 firmware and package it as BE2028 (Project ID=20888) to match the phone model in hopes that the Global firmware would allow the option to directly unlock the bootloader from the phone or adb/fastboot (e.g. without requiring/begging OnePlus support).

I was able to use oppo decrypt/encrypt and built the new .ops file. MSMDownloadTool applied the fireware to the phone without issue. However, it did not allow unlock directly from the phone (still needed OnePlus support to send me an unlock token).

I may give the N100 a try since it seems this model did allow the unlock directly for you (e.g. OnePlus Support not required). It seems more and more, vendors are putting the cab-bash on giving out unlock tokens. I'm interested in trying on a phone where I definitely do NOT need vendor to unlock.

As a side topic, I did see an announcement recently that in 2027, Motorola will release some models (didn't say which ones) with Graphene OS. So, that is promising for the future.

Just wanted to share that I had some battery issues (draining too fast, often draining the entire battery within 1 day) with a OnePlus Nord N10 5g. The phone I purchased was an old refurbished one and I'm not sure if the battery was refreshed or if it was the original battery.

Nonetheless, my battery issues have seemed to resolved and thought I'd share. It may help others or not. So, take it or leave it.

By default, the screen brightness was quite high (to the far right on the slider) and I can't recall if "Adjust automatically" was enabled or not. I manually selected the screen brightness to the lowest level I could tolerate without feeling like I couldn't see the screen. Surprisingly for me, I can move the slider almost all the way to the left. I also unchecked the "Adjust automatically". So, now the screen brightness is using the minimal battery. (I believe this was the biggest gain for me).

Furthermore, I am fairly conscious to disable WiFi unless I am actively using it for internet access.

That is all I did and now the battery lasts a couple days without charging (vs completely drain in 1 day) and does not drain much at all.

One last thing I am mindful of is to only use the charging cable that came with the device. I think the fast chargers that are more modern may easily cycle/overcharge older batteries and reduce the battery's long term life. With all batteries, there is a limited number of charging cycles and you'll notice that each 100% full charge may not last as long as when it was brand new. Overcharging (while at 100%) and/or letting the battery drain completely to 0% may reduce the life of the battery a bit. So, being mindful to unplug when at 100% and to start charging before it gets too low may help in maximizing its life.

Hope this helps.

Good luck maximizing your device's battery life!

@ma
Thanks for your suggestion. Things are working now since downgrading to 24.04.1.x RC.

I think the 24.04.2.x version had several things in read-only mode (only guessing from reading the logs that were generated). Even when trying commands as sudo, received similar errors "need root access, read access, etc".

Appreciate your input.

@idonthatevests

Thank you very much for the suggestion. I downgraded to 24.04.1.x RC and confirmed that VoLTE is working. Just curious if there where one can find notes with specific functionality in each version available? I tried to look for this but only found general info (and in threads for this phone it was mistaken that only 2.x was where VoLTE was functioning).

Again, thanks so much. Also, Waydroid installation was successful (using the Waydroid helper) on this 24.04.1.x RC version. Thank you very much once again! Much appreciated.

@pparent
Thanks for the info. I've been following the other threads and your great work to help make this available on Ubuntu Touch! Your work is so greatly appreciated! I look forward to helping out where I can. Cheers.

@gpatel-fr

Hi, thanks for your reply. Yeah, I'm running latest version of Ubuntu Touch (UT) for VOLTE as for my particular phone model, stable doesn't have functioning VOLTE. As a phone (talk/text), everything works well on the latest UT for me. I was experiencing errors with Waydroid that I didn't see in searching other posts, so wanted to inquire (wasn't sure if I was doing something wrong since it was my first time with Waydroid).

I was hoping I could get Signal working well but perhaps I need to downgrade to stable or be patient/wait.

Any users out there having success with Waydroid on the latest? or experiencing similar issues?

Thanks for sharing your experiences. I'm always up to learn more, to try things out, help with the improvement of things, etc.

Hello UT friends,

New to Waydroid and a bit stuck. When I try to run "waydroid init", I get an error stating that "init needs root access".

What I've done so far. From Open Store, installed Waydroid Helper, clicked install. Seemed to go well. I see the Waydroid icon as an installed app. However, when I click Waydroid app, the phone shows what seems to be the startup screen (Ubports ... 5 dots... it blinks through 2 times). I have to key in my phone unlock code. (seems that trying to start Waydroid looks like it reboots or restarts phone?).

However, no Waydroid. From Terminal, when I type "waydroid init" I get an error saying that "init requires root access". I tried the commands from the main Waydroid thread, but still not working.
https://forums.ubports.com/topic/5907/open-ubuntu-touch-to-all-android-applications/115

I've uninstalled from Waydroid helper and tried to reinstall, but same issues, same error. Any thoughts? Any insights or suggestions would be greatly appreciated!

(Running OnePlus Nord N10 5g, Ubuntu Touch 24.04.2.x)

Cheers, Leroy

@Sander - Wow. Thank you so much!! This is amazing!! I never thought to try to tap somewhere else. This is absolutely awesome and makes using the terminal a pleasant experience, even on a phone! Thanks again for sharing this gem!!

@gpatel-fr This is fantastic man! I didn't know about the hamburger option then Scr. thank you! Thank You! THANK YOU!! This is doing exactly what I want it to do. (I just have to go to hamburger each time I open terminal, but at least there is this option). Great idea too on setting up ssh and can connect to phone from actual computer and type with ease on full size keyboard. Thanks again!

Hello UT comrades,
I use Linux for my daily computer and it is so nice when in terminal to press "Tab" to complete filenames, directory names, etc (vs typing out name completely OR misspelling by 1 char). It would be even more amazing when in terminal on Ubuntu Touch phone.

Does anyone know of a way to modify one of the keys on my Ubuntu Touch keyboard to become "Tab"?

This would be amazing. Thanks for any thoughts and suggestions.

Cheers, Leroy

said in OnePlus just informed me they will NOT unlock bootloader for a device on bought on Ebay.:

@Leroy_Linux US Mobile. Also works with 5g on T-Mobile and AT&T 5g.

Nice! Thanks for the info! Will look to those carriers if the need arises.

said in OnePlus just informed me they will NOT unlock bootloader for a device on bought on Ebay.:

@Leroy_Linux Curious whether your second SIM slot works. BE2025 and BE2026 only have one SIM slot

Mine also only has 1 SIM slot (the 2nd slot is microSD).

@MarcelloTogg said in Difficulties with downgrading my OnePlus Nord:
always fail because the MSM tool can't establish a connection.

@mrt10001 - First, just wanna say, YOU ROCK!!! Your input and support to users in other threads is the only reason I was able to get mine to work. So, just wanted to express my sincere GRATITUDE for what you do. You're a hero in my book.

@marcellotogg - since I did this recently, I think I had a similar error to what you are describing. For me, the Project ID code for your MSM Tools image needs to match the version of Nord 10 that you have. From my notes, I had the BE2028 variant of the phone and the project that worked for me was 20888. If I remember, BE2026=Global=Project 20886, BE2029=Europe=Project 20889, I think BE2027 is TMobile Metro variant and maybe Project 20887 (but not sure on this one).

I was able to receive an unlock from OnePlus for BE2028. I was asked to send a proof of purchase (Amazon). Can you sell the eBay version to someone else and try to purchase from Amazon?

btw, it took about 2 weeks from when I screenshot the IMEI, serial, unlock code, etc before I receive the unlock token. (highly recommend screenshot vs talk over phone, I lost 3 additional weeks due to error in translation).

Please note: it works on T-Mobile, but starting next year they are deprecating 4G in USA with complete deprecation in 2028 (for Starlink satellite ... not dead zones any where it world!). I think from the VOLTE thread someone got it working on a Verizon subsidiary, so that could extend usage further. Not sure which one though.

Not sure if this impacts your decision. I'm going to use it as long as I can and try to stay Ubuntu Touch on my next phone too.

@jam1388 said in Working VoLTE reports, share your experience:

been hearing news about shutdown of 4g on t-mobile starting next month and only certain 4g devices will work ... I just hope this phone continues to work after the phase out of 4g how much speed do we need LOL!!

hello @jam1388 ! I totally agree with you! I just got my NORD n10 5g to work today and in the device verification via T-Mobile webpage, sadly, I think it said this won't work with the satellites. Hope we can get a couple of good years out of it nonetheless.

big THANK YOU for sharing your detailed experience in the OnePlus Nord N10 5g thread. I was inspired to attempt it after seeing you and others succeed!!

I really, truly want to express my sincere GRATITUDE to everyone in this wonderful forum and project in general. The developers, product mgrs, maintainers, support, forum members ... you are all HEROS to me! Let's keep it alive.