1. 首頁
  2. Support

子版面

  • This section is specifically useful for new contributors on the project

    5 主題
    13 貼文
    freddoF
    Hello! I'm a sysadmin at Luleå Academic Computer Society, LUDD, and we host mirrors at https://ftp.ludd.ltu.se/. We've already got a registered Ubuntu mirror, and as such I'm wondering if its possible to contribute a Ubuntu Touch image/package(click?) mirror or similar? Is there any contact point I can reach out to?

  • Discuss and solve problems with other users

    94 主題
    674 貼文
    pparentP
    https://forums.ubports.com/topic/11532/signal-ut-signal-desktop-for-ubuntu-touch

  • 157 主題
    1k 貼文
    Eric HE
    @Sentinel said in No GPS access from inside Waydroid: maybe the MIUI version I flashed might have impacted Waydroid's reliability or other things? Yes — this can significantly affect UT. The MIUI image version to use is specified in the installation guide under "2. Check the correct version of MIUI", and it looks like you used the correct one. I can't explain the unusual bugs you've reported. Did you remount the system as read-write and make any changes? Did you use apt (update/upgrade/install)? I'm fine with starting a new discussion thread.
登入以發表
Load new posts
  • U

    UT filemanager preview rotated picture orientation issue

    Unsolved
    6
    0 評價
    6 貼文
    592 瀏覽
    arubislanderA
    @uwahl said in UT filemanager preview rotated picture orientation issue: Anything I could do? You could start by checking if there is already an issue opened in the File Manager issue tracker (link can be found in the Open Store listing of the app). If there already is an issue opened, you can check if there is additional info that can be added. If you can code (or are willing to learn) you could jump in and try to solve the issue and open an MR when you have.
  • J

    此主題已被刪除！

    Unsolved
    1
    0 評價
    1 貼文
    2 瀏覽
    尚無回覆
  • P

    Fixing corrupted videos recorded with Google Pixel 3A + UBPorts OTA23

    1
    0 評價
    1 貼文
    276 瀏覽
    尚無回覆
  • H

    Volla Quintus Update fails

    Solved
    4
    2
    1 評價
    4 貼文
    565 瀏覽
    AppLeeA
    @haagch said in Volla Quintus Update fails: I guess I'll mark this as solved even though going through RC is more of a workaround than an actual solution, because the update really should just work. Hi @haagch , This is the way to go. The forum is not a bug tracker. You had an issue someone helped you solve it. For reporting bugs it should be done in the Gitlab or Github dedicated to the proper project. Can be Ubuntu Touch, a specific app, a device specific issue, ...
  • K

    I have a problem for google pixel 3a install Ubuntu Touch

    Unsolved
    3
    0 評價
    3 貼文
    445 瀏覽
    B
    @kuuga What OS are you using for your host PC in the installation? If ADB cannot see the device, especially when the phone is in "fastboot" mode, with a windows host, this is probably because of missing google android drivers. On a Linux host, the command line tools from google should just work as-is after extraction. (In my bumbling around I used both.) Windows google-android driver: https://developer.android.com/studio/run/win-usb This guide below was extremely helpful for me, specifically the sections "Prerequisites" and "Unlocking Bootloader" since google's developer pages have so many dead 404 links. The other sections can be ignored if using UBPorts installer. https://xdaforums.com/t/guide-pixel-3a-sargo-unlock-bootloader-update-root-pass-safetynet.4443459/ Don't forget to downgrade your Pixel3a to Android 9 before running UBPorts installer.
  • R

    SMS Group

    4
    1 評價
    4 貼文
    693 瀏覽
    lduboeufL
    @MV said in SMS Group: I was looking for this topic and i find this 'old' thread. Is it possible to create group for SMS? If I try to create a group, it seems that the APP consider it as an MMS group that I'm not interested in because in this case the data-connection should be activated (and anyway it doesn't work). Is there anyone that a feedback or the situation is the same as posted the 9 June 2020? Thank you in advance afaik group chat doesn't exist in the SMS protocol. Or i missed something. You can broadcast sms to several users, but the answer will be on the sender contact thread.
  • J

    Camera stays black - possible to restart (via terminal)?

    Unsolved
    20
    1 評價
    20 貼文
    3k 瀏覽
    MVM
    @jojumaxx Same issue with Vollaphone22 with dual boot (VollaOS and Ubuntu Touch on the SD-Card). I've never head before this problem with previous version (till 2024). I tried to unmount and mount again UT but the problem still remain. Black screen
  • J

    Pegasus Project

    Unsolved
    3
    0 評價
    3 貼文
    305 瀏覽
    arubislanderA
    @journeyman09 Pegasus seems to target Android and iOS. So not a threat for Ubuntu Touch. But even if it were, you would have needed to install it yourself, or have run / installed a click package from outside the Open Store.
  • A

    Multimedia player

    Solved
    24
    0 評價
    24 貼文
    3k 瀏覽
    C
    @domubpkm I use mpv in libertine and it works really good.
  • M

    Lenovo X306X updates are not working

    Unsolved
    12
    0 評價
    12 貼文
    1k 瀏覽
    M
    I still can’t get wifi/bluetooth, even after using the Lenovo Software Fix tool to reset to android (where wifi/bluetooth work well on it) and started the installation again from the beginning. I still have the last image of UT flashed and followed the instructions well. (+ and the command fastboot format:ext4 userdata works correctly now, no need to format through the tablet) Maybe I should try to reinstall with ubports (hoping not to back again into the bootloop problem) or use another image ? (Maybe for some unknown reason, this image is problematic for me ?)
  • A

    adjustable playback speed

    Unsolved
    4
    0 評價
    4 貼文
    411 瀏覽
    A
    @ikoz said in adjustable playback speed: t should be relatively easy with a script using ffmpeg, either in Libertine or bundled in an app. The following command should work: ffmpeg -i input.mp3 -filter:a "atempo=1.5" output.mp3 Thanks you so much! It worked! For anyone interested. I first installed ffmeg in the Libertine client. Looked for the mp3 file in the folder and used the following script to run the script in the libertine container: libertine-lauch -i CONTAINER-IDENTIFIER ffmpeg -i input.mp3 -filter:a "atempo=1.5" output.mp3 Really nice! And because of this I begin slowly exploring the power of Libertine!
  • J

    此主題已被刪除！

    Unsolved
    1
    0 評價
    1 貼文
    1 瀏覽
    尚無回覆
  • D

    Speaker's sizzles when reading a multimedia file

    Unsolved
    7
    -1 評價
    7 貼文
    666 瀏覽
    D
    @arubislander More clear it seems, not perfect. Or easer to listen. I'm not completly sure. I edited the first comment.
  • C

    Daily Driving Woes

    Unsolved
    3
    0 評價
    3 貼文
    485 瀏覽
    K
    First of all, it'll be really hard to address your concerns since you're in xenial which is outdated for more than a year now. The bugs you encountered might already be fixed but will never be fixed in xenial. Also please tell us which device you have. It may also be possible that your device have a port that is unmaintained or not in good quality. I've never encountered your issue with the lockscreen and alarm. Perhaps you used passwd to change your password? You shouldn't do that since the settings app does something else and the system expects those. I've been using my UT device for my alarms for a decade now and I don't remember it failing. We don't have any complexities in time such as daylight savings though which perhaps causes these issues? As for Libertine, it really is under-developed and never found it reliable. It works for some cases but definitely not with GUI apps. For encryption, someone has experimented with it but nothing official yet. At the end of the day, someone has to put the effort on it but so far no one succeeded yet.
  • chriscC

    Lock screen doesn't lock

    9
    0 評價
    9 貼文
    2k 瀏覽
    K
    @arubislander Yeah, I've never encountered this issue as well except when dealing with external displays. Using passwd` is discouraged because it may cause issues since there are other things that happens when you change the passcode/passphrase in the settings app.
  • I

    Property .virgl not found when running utqemu start

    已移動
    5
    0 評價
    5 貼文
    822 瀏覽
    D
    Disabling gl in the command line gets it to boot, as in: qemu-system-x86_64 -enable-kvm -m 2G -device virtio-gpu -display sdl -netdev user,id=ethernet.0,hostfwd=tcp::10022-:22 -device rtl8139,netdev=ethernet.0 ubuntu-touch-mainline-generic-amd64.img However the latest version is hanging at boot with starting VPN (VPN? LOL!).
  • V

    no wifi on tb-x606x

    Unsolved problem tb-x606 no wifi
    3
    0 評價
    3 貼文
    369 瀏覽
    K
    @visible The port of that model is quite dead now so you might not get much help on this unfortunately.
  • B

    Lenovo Tb-X606X wifi issue

    Solved tb-x606 lenovo
    14
    0 評價
    14 貼文
    3k 瀏覽
    V
    @borgchrist1 Please give me a ready image with the fix. I can't compile it.
  • C

    Ubuntu 16.04 installed. Can I upgrade it now?

    Solved
    5
    0 評價
    5 貼文
    696 瀏覽
    C
    @stanwood Gotcha, thank you. Kudos to the core team and the forum admins. Cheers!
  • U

    Fahrplan2 app stopped working in Germany?

    Solved
    4
    -1 評價
    4 貼文
    587 瀏覽
    U
    After the new update the Fahrplan app is working again. I am happy; thanks a lot for your work. I'm marking the topic as solved.