@mario-ch Don't worry about it. I did exactly the same thing a few hours ago. The delineation between posts is unclear.

@nocturn-adrift you can leave the defaults and it should work without issue. The proxy isn't nessary unless you have specific network restrictions you need to worry about. You can generally leave that blank. The SSL flag should be enabled, it ensures the connection between pantalaimon and matrix.org remains secure. Generally there should be no reason to turn that off and I'll probably remove the switch with my next update.

Well, it depends on your requirements. I have it installed since yesterday and did quite some bit of testing or trying to get things work. In my eyes, it is not yet sufficient as daily driver because of a couple of issues: (1) Most Android-apps won't work in Anbox. I tried a couple and none of them was working (e.g., FairEmail, my banking app, my app for rent a bicycle, etc.). Anbox is in heavy development so I expect those things to improve over time. (2) If you require access to e-mails on Office365 (a lot of companies use that), then it is at least a bit rough around the edges (you need Dekko2 as the standard-mail-client plus the Outlook-WebApp). Dekko2 doesn't support OAuth yet. Technically, most things work fine, but I have to say I don't use mobile data so regard that as untested.

@hamzaaziz Someone that registers only to post external link... If you can make tutos, you can post them in threads you create here.

I am happy to report that the application has been fixed today. Thanks for such fast work.

alternately, you can install clicks with ut tweak tool (try this if on pinephone) or from commandline pkcon install-local --allow-untrusted add the package name at the end make sure you are in the folder the package is in

@marc123454321 I wrote a script that makes open VPN connections for PrivateInternetAccess.com and developed and tested it on a Nexus 4. It works well. I see you are using a different VPN provider so I don't think it will work. If anyone needs such a script for their UT device, let me know and I can post it.

@mark1250 Sending message with google messaging app in RCS mode should not be a problem, normally, it should convert to SMS or MMS if contact doesn't have RCS on his phone/carrier. But this is what should happens, and sometime with this kind of things it's not what really happens ^^

@keneda No, but that's a good point. I'll do that. Thanks.

see at the bottom of that web page: https://01.org/ofono

Marking this as solved. I got confused over the instructions here. [image: 1623961349486-screenshot_2021-06-17_16-14-09.png] I had somehow forgotten a "shell" is just a terminal window. Instruction #1 is superfluous! You can just type in the command in #2 in your phone's terminal window and install it! EDIT: MAKE SURE TO RUN IT WITH SUDO or it will ask you for another prompt and could crash!

@flaun-in It's in the cog wheel menu (top right next to the blue "reply" button) The last menu entry is "ask a question" (this is the first step) Then with the same menu there is now "mark as solved". I'll let you try this and will do it if you still don't find it...

GitHub bug report opened. https://github.com/ubports/ubuntu-touch/issues/1750

@dobey Thanks for your suggestion. That is the most likely explanation. Just restarted Teleports on my UT devices and UBports Overflow has auto-magically re-appeared! I didn't need to do anything. Bizarre!

@my-name Isn't that the point? You have to wake up so stopping or snoozing needs a bit of effort. I'd say, put the buttons in random locations

For a strange reason I receive notification today ! Afters weeks without any. Any idea about that ?

@x-dub Maybe you should make a "help wanted" post on this forum instead of hinding the link here in a thread that only people interested in XMPP will read

@lakotaubp hey thank you for the answer my install is armhf, but i didn't choose, i just follow the installer my xperia is X F5021

Finally got to this. library "libgui.so" wasn't loaded and RTLD_NOLOAD prevented it Creating a QMirClientScreen now BrightnessItem::BrightnessItem(const QVariantMap&, QObject*) ubuntu.widi.supported: 0 QObject::connect: No such signal QDBusAbstractInterface::EnabledChanged(bool) QProcess::start: Process is already running library "/vendor/lib/egl/libGLESv2S3D_adreno.so" not found Releasing device model .. file:///usr/share/ubuntu/settings/system/qml-plugins/about/PageComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/about/PageComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/about/PageComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/about/PageComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. [PERFORMANCE]: Last frame took 50 ms to render. qml: TypeError: Cannot read property 'isCombined' of undefined qml: TypeError: Cannot read property 'isCombined' of undefined qml: TypeError: Cannot read property 'isCombined' of undefined qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error qml: TypeError: Type error file:///usr/share/ubuntu/settings/system/qml-plugins/SystemSettings/ItemPage.qml:32: TypeError: Cannot read property 'translations' of undefined file:///usr/share/ubuntu/settings/system/qml-plugins/SystemSettings/ItemPage.qml:32: TypeError: Cannot read property 'translations' of undefined [PERFORMANCE]: Last frame took 1346 ms to render. QObject::startTimer: Timers cannot be started from another thread [PERFORMANCE]: Last frame took 16974 ms to render. [PERFORMANCE]: Last frame took 1041 ms to render. QObject::startTimer: Timers cannot be started from another thread [PERFORMANCE]: Last frame took 6150 ms to render. [PERFORMANCE]: Last frame took 993 ms to render. QObject::startTimer: Timers cannot be started from another thread [PERFORMANCE]: Last frame took 36154 ms to render. [PERFORMANCE]: Last frame took 1187 ms to render. [PERFORMANCE]: Last frame took 1012 ms to render. QObject::startTimer: Timers cannot be started from another thread [PERFORMANCE]: Last frame took 6061 ms to render. [PERFORMANCE]: Last frame took 852 ms to render. QObject::startTimer: Timers cannot be started from another thread [PERFORMANCE]: Last frame took 4540 ms to render. qt.qpa.mirclient: Attempted to deliver an event to a non-existent window, ignoring. file:///usr/share/ubuntu/settings/system/qml-plugins/flight-mode/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/orientation-lock/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/update-notification/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling file:///usr/share/ubuntu/settings/system/qml-plugins/about/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/reset/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. library "libgui.so" wasn't loaded and RTLD_NOLOAD prevented it Creating a QMirClientScreen now BrightnessItem::BrightnessItem(const QVariantMap&, QObject*) ubuntu.widi.supported: 0 QObject::connect: No such signal QDBusAbstractInterface::EnabledChanged(bool) QProcess::start: Process is already running file:///usr/share/ubuntu/settings/system/qml-plugins/cellular/PageComponent.qml:30:1: QML PageComponent: Binding loop detected for property "height" library "/vendor/lib/egl/libGLESv2S3D_adreno.so" not found file:///usr/share/ubuntu/settings/system/qml-plugins/cellular/PageComponent.qml:30:1: QML PageComponent: Binding loop detected for property "height" file:///usr/share/ubuntu/settings/system/qml-plugins/flight-mode/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/orientation-lock/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/update-notification/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/about/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling. file:///usr/share/ubuntu/settings/system/qml-plugins/reset/EntryComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling.