子版面

  • This section is specifically useful for new contributors on the project

    5 主題
    14 貼文
    I
    @freddo Thanks, that would be great to have a few mirrors, but currently, there's no integrity check mechanism implemented in OpenStore, and that is a requirement. I think I'll try doing something about it soon. That would also require cooperation with the OpenStore team
  • Discuss and solve problems with other users

    94 主題
    674 貼文
    pparentP
    https://forums.ubports.com/topic/11532/signal-ut-signal-desktop-for-ubuntu-touch
  • 157 主題
    1k 貼文
    Eric HE
    @Sentinel said in No GPS access from inside Waydroid: maybe the MIUI version I flashed might have impacted Waydroid's reliability or other things? Yes — this can significantly affect UT. The MIUI image version to use is specified in the installation guide under "2. Check the correct version of MIUI", and it looks like you used the correct one. I can't explain the unusual bugs you've reported. Did you remount the system as read-write and make any changes? Did you use apt (update/upgrade/install)? I'm fine with starting a new discussion thread.
  • Favicons

    1
    0 評價
    1 貼文
    290 瀏覽
    尚無回覆
  • Rockwork/ Pebble issues

    已移動
    4
    0 評價
    4 貼文
    1k 瀏覽
    A
    The recent update to OTA 6 has done something that enabled me to have a decent connection to my pebble time watch. However, I am unable to dismiss notifications so it is getting there. I think I must be missing something in the set up.
  • The connection for the USB device 'Qualcomm A0001' was unsuccessful. Driver error.

    2
    0 評價
    2 貼文
    325 瀏覽
    LakotaubpL
    @jamc You could also ask your question on our Telegram install group here https://t.me/WelcomePlus I know some of them have experience with macs etc.
  • oneplus one (bacon) issues: updates, wifi, text/txt/sms/mms, & phone calls

    已移動
    13
    0 評價
    13 貼文
    3k 瀏覽
    M
    I have problems with the wifi on a different phone, a Pro5, since I purchased it and never understood why but I always thought this phone wasn't a lucky one. I'm on 16.04 Devel but it doesn't work regardless of the channel, and on the Vivid image as well. The wifi is working when I reinstate the credentials every time, but it doesn't automatically show up at every reboot, as the Access Point credentials didn't exist before. I read @Flohack reporting about a MAC number problem, so I tried to investigate to see what happens on the phone at reboot. After rebooting, I checked the var/log/syslog and I found a MAC verify failed kernel error. @Osndok, by the chance do you have the same error? Could it be related to the fact that the wifi doesn't work? If of any interest, I provide part of the syslog HERE. Matteo
  • How to setup crossbuilder in Ubuntu 18.10?

    已移動
    2
    0 評價
    2 貼文
    520 瀏覽
    LakotaubpL
    @marc_aurel Just moved you : ) You question is better suited to here. Hope you get sorted quickly.
  • no wifi on hammerhead (OTA-6, 16.04/20181126)

    7
    0 評價
    7 貼文
    777 瀏覽
    T
    In case somebody might have similar issue and settings: I found rndis as solution for any useable inet access at least. Docu here: http://docs.ubports.com/en/latest/userguide/advanceduse/reverse-tethering.html I had to set link up and give address manually. But jippie, it works. (WiFi stopped working. Was not able to get it working again.) I got inet connection on the phone, but it seems to not use this connection for "fetching channels" - wheel's turning, no traffic seen via tcpdump on the rndis interface of the pc. Still: Some image/packages to download would still be great.
  • Installation alternatives for unsupported phone

    2
    0 評價
    2 貼文
    2k 瀏覽
    advocatuxA
    @drosera_capensis the only option is to try to port that device to Halium, and then try to port it to UT.
  • Aquarius 4.5 how to delete Browser Next

    8
    0 評價
    8 貼文
    1k 瀏覽
    J
    Just in case. My OS is now Ubuntu 16.04 (2018-W50). I could not locate Next anymore, so if it left something to the system then they will stay. Still, that is a small price to pay for convenience.
  • Trying to understand how developers are performing their work

    2
    0 評價
    2 貼文
    586 瀏覽
    R
    Hello Everyone, While I may appear to be new, I have longed for UT for several years. I just purchased an N5 in excellent virtually unused condition. However, I have concerns. I read here the battery has life has improved in xenial. However, my real need is to understand how developers are performing their work. By this, I suspect a debugger is involved. What are the tools involved in this game? From my perspective, the N5 is certainly suitable to get me in the development game. Older hardware does not bother me. I currently have a 2013 LG Optimus G Pro in perfect condition, I do not tread on my phones, that I would love to begin porting with Halium. However, it makes much more sense for these idealogical goals, or myths to be discussed in the framework of hardware, system architecture, etc., rather than, "I would like to know if my device can be ported." What can you tell me? I am here to learn and to have fun!
  • [solved] How can a webapp run in sandbox when using Morph browser to display its content?

    5
    0 評價
    5 貼文
    1k 瀏覽
    C
    @dobey said in How can a webapp run in sandbox when using Morph browser to display its content?: It does not destroy the profile on exit, no. Why would you want such a behavior? Just to prevent blowing up the webapp profile too much... As a pure reading app, in my eyes there is no need to store any data on the phone. Neither cookies nor anything else (e.g. accepted privacy confirmations).
  • bq Aquaris 4.5 Ubuntu Touch (vivid/ubuntu 15.04) is not upgrading.

    12
    0 評價
    12 貼文
    2k 瀏覽
    ?
    @root-ruud You've prompted me to look at the dialer app in more detail! If you swipe up from the bottom edge, it gives you a lot of details about calls: date and duration, incoming/outgoing and to whom, etc.
  • Meizu MX5 Pro Ubuntu edition Bootloop'ed

    2
    0 評價
    2 貼文
    450 瀏覽
    S
    @sz If you meant PRO5 , read here those links, should help you. If you meant MX5 , this device was never supported, so no such a thing as UT on it. The most likely your problem is ,,too small cache partition,, (Meizu Pro 5 ) https://forums.ubports.com/topic/665/meizu-pro-5-without-any-os https://forums.ubports.com/topic/1610/meizu-pro-5-16-04-stable-backup-for-restoring-with-twrp https://forums.ubports.com/topic/1252/problems-flashing-ubports-on-meizu-pro-5-android-international-edition http://sturmflut.github.io/
  • OTA-6 update not available anymore

    9
    0 評價
    9 貼文
    2k 瀏覽
    R
    Same as @Michael for me. So everything's ok now.
  • [wifi] how to fix wrong regdom?

    5
    1 評價
    5 貼文
    595 瀏覽
    F
    Found a related bug report: Hammerhead: Some Wifi networks don't appear #714.
  • Wake up CPU cores

    1
    1 評價
    1 貼文
    340 瀏覽
    尚無回覆
  • Battery replacement concerns!

    4
    1
    0 評價
    4 貼文
    815 瀏覽
    ?
    Yes, I also expect that it is far more likely that a defective battery is to blame, plus the batteries should have protection circuitry built-in anyways. Based so far on what I have read (There is some BAD information out there!), there is some handling of this information by Android, so I will figure it out before I reattempt. The Android batterystats.bin information is surviving the flash into UT somehow, because the battery life is in the ballpark of being similar between an Android and UT system. Or maybe it isn't being preserved and it is part of the reason everyone complains about battery life? It would be interesting to hear a battery replacement success story. A possible solution would be to replace the battery and perform a few discharge cycles under Android before reflashing as it is a very infrequent event. Anyway, I have put the original battery back in, and everything is running smoothly now. I plan on reattempting this in the near future, but I will try to buy a more expensive knock-off this time.
  • 0 評價
    3 貼文
    673 瀏覽
    myiiM
    GSettings values: $ gsettings list-recursively com.ubuntu.touch.sound com.ubuntu.touch.sound incoming-call-sound '/usr/share/sounds/ubuntu/ringtones/Ubuntu.ogg' com.ubuntu.touch.sound incoming-message-sound '/usr/share/sounds/ubuntu/notifications/Rhodes.ogg' com.ubuntu.touch.sound silent-mode false
  • Keep alive disabled by default ?

    已移動
    5
    0 評價
    5 貼文
    1k 瀏覽
    dobeyD
    The value you see from /proc/ is the default value, and it is 7200 seconds. Setting it to a much lower value would not solve whatever issue it is you're having. More than likely, the router (or DHCP server rather) is renewing the IP lease, which is probably resulting in a new IP address or other disruption to any active connections. Or there is some other problem.
  • [solved] Is there a StackExchange-app available for Ubuntu Touch?

    已移動
    2
    0 評價
    2 貼文
    442 瀏覽
    mymikeM
    @custello just search for it on open-store.io, but there isn't one I think. anyway, you can easlily make a webapp using webapp creator on Ubuntu Touch for that website
  • Morph Browser debugging?

    已移動
    1
    1 評價
    1 貼文
    310 瀏覽
    尚無回覆