1. 首頁
  2. Support

子版面

  • This section is specifically useful for new contributors on the project

    7 主題
    1 貼文
    DiogoD
    This Category is for those starting to contribute for the UBports Project and Community. By contributing, we mean doing things like: coding quality assurance (testing, bug reporting and validation, etc...) translations app development and maintenance writing and validating technical documentation and user manuals UBports social media and marqueting etc... If you want to contribute in these ways or others and have questions about it, like how to get started, where can you find information, please leave your questions in this category and we will try to answer them the best we can.

  • Discuss and solve problems with other users

    90 主題
    645 貼文
    developerbaymanD
    @bearbobs sorry for the late reply its been busy with work...did you have to host the emulationstation?....because not sure how to host from within a clickable.....Iv seen the project before but have not really done anything with it....if it runs totally client side its do able....but if it needs hosting I don't think it can be done....the nes I'm working on is a heavily modded JavaScript emulator runs totally client side i added touch support fixed up the audio and added a lot of mapper support.....one big issue is the webview out of the box is....well lacking...if you load mario you will see black squares around the clouds and other sprites...not the emulator but the webview....

  • 133 主題
    933 貼文
    hankschwieH
    @Ken1971 Hi! After a few failed attempts trying to save the data of my waydroid installation I was able to solve it, but had to erase all the user data, and re-install everything I had running in the waydroid installation. 24.04 is not yet available for Fairphone 3, so its 20.04 I'm using.
登入以發表
Load new posts
  • D

    BUG IN 16.04 NOTIFICATIONS

    10
    0 評價
    10 貼文
    789 瀏覽
    arubislanderA
    @domubpkm said in BUG IN 16.04 NOTIFICATIONS: So what i said is always valid for my phones.. To be corroborated I can corroborate this bug on my M10 FHD tablet on 16.04/devel
  • S

    此主題已被刪除！

    8
    0 評價
    8 貼文
    100 瀏覽
  • SlayneS

    [solved] Mx4 - Installer blocked at "waiting for recovery mode"

    40
    0 評價
    40 貼文
    8k 瀏覽
    advocatuxA
    @halucigenia ah, I see
  • M

    Install on MX4 without USB

    6
    0 評價
    6 貼文
    776 瀏覽
    halucigeniaH
    FYI I have been here before - See https://forums.ubports.com/post/4741 I just thought that this thread might have something that I have not yet tried.
  • S

    Document viewer for Xenial?

    4
    0 評價
    4 貼文
    464 瀏覽
    advocatuxA
    @stefano sure, can you PM your Telegram or Matrix handle?
  • T

    *Solved* Installer get stuck waiting for device recovery mode during install

    10
    0 評價
    10 貼文
    7k 瀏覽
    H
    @themoose007 can you please tell which version of the installer you were using?
  • A

    how i can install ubuntu programs

    terminal apt-get
    10
    0 評價
    10 貼文
    1k 瀏覽
    advocatuxA
    @ali461 you're welcome!
  • nikalonN

    How to launch GUI apps from CLI?

    5
    0 評價
    5 貼文
    657 瀏覽
    nikalonN
    @alan_g said in How to launch GUI apps from CLI?: @nikalon you have to "trick" Unity8 into allowing the application to connect. I have not tried it recently, but something like this... https://lists.ubuntu.com/archives/mir-devel/2015-September/001267.html Yes! That works, thank you! For anyone who wants the answer you have to append the paremeter --desktop_file_hint=unity8 or -- --desktop_file_hint=unity8 to a regular binary you want to open. This is the syntax: ./application -- --desktop_file_hint=unity8 Unfortunately the game crashes because of some OpenGL problem that I don't know how to solve yet: library "/vendor/lib/egl/libGLESv2S3D_adreno.so" not found ----- Initializing OpenGL ----- Initializing OpenGL subsystem Using 8 color bits, 24 depth, 8 stencil display shutting down: Unable to initialize OpenGL (glAccum) idRenderSystem::Shutdown() Shutting down OpenGL subsystem Sys_Error: Unable to initialize OpenGL (glAccum) shutdown terminal support But that's an unrelated question that I should ask elsewhere.
  • ?

    August 15 16.04-RC updates scrapps BQ Aquarius M10

    7
    0 評價
    7 貼文
    728 瀏覽
    advocatuxA
    @bq10_user can you try putting your device in bootloader mode and adding --bootstrap parameter to the command you're already using?
  • M

    Update dev 136

    1
    0 評價
    1 貼文
    264 瀏覽
    尚無回覆
  • D

    August 15 devel channel update renders your device unable

    32
    0 評價
    32 貼文
    6k 瀏覽
    LakotaubpL
    Nexus5 also ok on 532
  • A

    Meizu Pro 6

    已移動
    4
    0 評價
    4 貼文
    719 瀏覽
    M
    @alexander Xda forum has info on how they unlocked the bootloader for pro5. Maybe there is more info on there. Also it depends on your comfort level.
  • D

    UT audiocast distorted on M10 HD tablet

    10
    0 評價
    10 貼文
    1k 瀏覽
    D
    Today I tried to listen to the latest Wayne and Joe audiocast using my M10 vivid tablet. Again the audio was distorted by a terrible vibrato. I then tried listening via the UT browser on the tablet. Still the distortion persisted. I then tried listening via firefox on my netbook and the audio was fine. Do other UT M10 tablet users also have this problem? Someone previously suggested that this may be an android audio driver problem. BTW, I don't have this problem with ogg, mp3, mp4, youtube, etc. If it is an android audio driver issue, is it likely to be updated in the future?
  • D

    WifiTransfer not connecting to Ubuntu 18.04 LTS

    22
    0 評價
    22 貼文
    5k 瀏覽
    Pulsar33P
    @dtarrant : Yesss ! Happy for you Best regards Pulsar33
  • ?

    Cannot install ubuntu touch on BQ M10 ubuntu edition

    75
    0 評價
    75 貼文
    25k 瀏覽
    advocatuxA
    @ziggutas you can follow the ongoing effort to compile Dekko2 for xenial here https://forums.ubports.com/topic/1477/dekko2-developer-community-thread/25 and here https://gitlab.com/dekkoproject/dekko/issues/ P.S. I'm using webmail until Dekko2 is ready
  • M

    Bug report

    3
    0 評價
    3 貼文
    457 瀏覽
    arubislanderA
    @markalexa What this means for you, if you really don't want to go back to Android, and the camera function is important to you, is to "downgrade" back to 15.04 until OTA-5 comes out.
  • A

    HTC M7

    已移動
    4
    0 評價
    4 貼文
    857 瀏覽
    advocatuxA
    @ayenack you're welcome. The necessary first step to port UT is to port it to Halium, and there's some WIP on some Motorola models as you can see here https://github.com/Halium/projectmanagement/issues?utf8=✓&q=is%3Aissue+is%3Aopen+motorola but if you want a UT device now, yes it's better to buy a supported device.
  • N

    16.04 Devel on BQ E5 HD - Issues in Telegram and Dekko2

    7
    0 評價
    7 貼文
    2k 瀏覽
    N
    Telegram latest version works fine on 16.04 RC. Also check below procedure for Dekko. I found this out after googling... https://gitlab.com/doniks/dekko/tags/0.1.6-alpha0
  • shapleyS

    OnePlus One firmware updates

    5
    0 評價
    5 貼文
    611 瀏覽
    U
    I have the OnePlus One running UT and when I installed, there was no issues, as I did not select the wipe option either. Phone calls have been working fine and the only issue I found was not being able to close the calls and when the other user ended the call, there was a loud beeping sound. It is good that you have now sorted the issue out.
  • shapleyS

    OnePlus One convergence

    1
    0 評價
    1 貼文
    629 瀏覽
    尚無回覆