Subcategories

  • Subforum for Asus devices

    8 Topics
    54 Posts
    MrT10001M
    @Shriharsh-Kulthe It is an old phone (with the micro USB port) and the fact it updated to Noble may indicate further work may be done. It is not a common device though and I did use it for my main UT device for a while.
  • 65 Topics
    491 Posts
    MrT10001M
    @tacetion so is it up and running with UT? A prototype is well worth keeping, collectors may seek something like that out..... It could also have had a screen replacement...
  • 272 Topics
    3k Posts
    pparentP
    @arubislander said: @pparent Where was this announced? Well "annonced" maybe was not the correct term, but it was at least mentioned as a possibility here: https://www.phoronix.com/news/Fairphone-6-Linux
  • 447 Topics
    4k Posts
    I
    Reporting back for future generations, I think I've found the issue. I was retracing my steps and found this: When installing postmarketOS there is a device specific instructionto run "fastboot oem uart enable" command. So I tried to run "fastboot oem uart disable" and then flash UT. So far working like a charm. Did a switch off, did a restart and all works as I'd expect it - also with Libertine set up.
  • Subforum for JingLing devices

    15 Topics
    114 Posts
    M
    Hi @miy Did you manage to revive your Jingpad? If yes, can you please tell what you did?
  • 122 Topics
    980 Posts
    H
    @gpatel-fr thank you for the mkv samples! @gpatel-fr said: this 'Microsoft MPEG-4 4.2' is probably the same thing as your '10 bit support'. not really, the issue is definitely the bit depth of the video, correlated with the format profile. Higher definition videos such as H.264 AVC "High 10" profile (using mediainfo) : Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : **High 10@L3.1** Format settings : CABAC / 5 Ref Frames Format settings, CABAC : Yes Format settings, Reference frames : 5 frames Codec ID : V_MPEG4/ISO/AVC Duration : 46 s 0 ms Width : 1 024 pixels Height : 576 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 24.000 FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : **10 bits** Scan type : Progressive Writing library : x264 core 165 r3222 b35605a Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=8 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=crf / mbtree=1 / crf=18.0 / qcomp=0.60 / qpmin=0 / qpmax=81 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 Default : Yes Forced : No Color range : Limited Color primaries : BT.601 NTSC Transfer characteristics : BT.709 Matrix coefficients : BT.601 To reproduce this, you can use ffmpeg to enforce a higher bit depth on any of these samples: ffmpeg -i test5.mkv -c:v libx264 -pix_fmt yuv420p10le -crf 18 -preset slow -c:a copy test5_10bit.mkv and confirm it does not play on the UT player, despite desktop OSs having no issue playing it (at least that's my experience). It does, as you suggested, play on (libertine) mpv or vlc, so it seems like a limitation of the default player (I'd open a bug on the app repository, but can't seem to find it for the media player).
  • Subforum for LG devices

    10 Topics
    148 Posts
    L
    @ikoz [image: 1760205347903-5ce2605b-eb49-418b-ba83-03b46c94457d-image.png] Channel list is empty
  • Subforum for Meizu devices

    28 Topics
    183 Posts
    MrT10001M
    Have you checked here or asked as the audience will be a lot larger?
  • 436 Topics
    5k Posts
    R
    OnePlus phones are very hard to brick. They can be recovered using the msmDownloadtool usually included with the image on the UT device's webpage. If it isn't, xda-developers has them, for every OnePlus model.
  • Subforum for PINE64 devices

    70 Topics
    561 Posts
    arubislanderA
    @newguy said in Upgrading Pinephone from 20.04 to 24.04: I'm looking for a way to upgrade my PinePhone to version 24.04. There is no such way yet. At least not unless you are prepared to dive in and fix the issues that will surely cause the OS to malfunction after the upgrade.
  • 55 Topics
    343 Posts
    Mario.CHM
    Hi @Rondarius, Just tried it out and it works flawlessly. Thank you very much. Best regards Mario
  • Subforum for SHIFT devices

    4 Topics
    13 Posts
    S
    Hi, I am using Ubuntu Touch on Shift6mq. I like to swap between Wifi Data and Mobile Data. The Wifi Data usually gives me a list of Networks and which one is connected. However, turning off Wifi Data, then turning on Mobile Data; then access internet, then turn off Mobile Data; then Power off and Power back on: The Wifi Data is set on, but there is no list of Networks. Access to previously accessed Networks does not work. I have not found a way to reactivate the Wifi Network from this condition. Can anybody help? cheers, Steve D
  • 99 Topics
    1k Posts
    DJacD
    sorry, I am not realy precise in the description but I don't understand realy the probleme (not fluent in english - better in french) It is a critical problem, met first in 20.04, then in 24.04. today, I take some photos with my phone (this is not often). no probleme. , but then (20 mn later) I re-launch the camera app and the camera came to vibrate (trying to focus ?), without stop... even when I stop the app. I have to reboot the phone (the vibrations only stop when the phone was totaly stopped) And now, there are problems with the camera : I could take a photo once. never reboot, and now It doesn't work (no image on camera) nb : now it works, with light corrigation on the image this is the 2nd sony xperia X I use with UT. previously, my 1st device had the same probleme on 20.04. And I think it break the camera... (but I made it fall too... so I m not sure)
  • 213 Topics
    2k Posts
    J
    @gpatel-fr I feared you'd say that. But I thought I ask anyway. Nevertheless, thank you so much! Yet, that helped me a lot.
  • 334 Topics
    3k Posts
    pparentP
    @arubislander said: Although, to be fair the creator of the WhatsNew app has taken measure to suspend the app when it looses focus as well I've not done that specifically in whatsnew. What happens is that normally when an electron app is not anymore in foreground it goes into a "throttling" mode meant to keep operating the website but with lower resources. This is a feature from chromium. That being said I have no idea why XWayland/electron apps don't get suspended by default. For Signal UT or Whatsnew it is handy to get background notifications though. The behaviour encountered by @smobilesoft (high CPU usage) is not normal , I've not been able to observe it myself, and it seems since he reinstalled the app it has gone. So this is a bit strange.
  • Request to list this device in the device subfolder

    1
    0 Votes
    1 Posts
    320 Views
    No one has replied
  • What does "No reboot needed for 1 week" mean?

    8
    0 Votes
    8 Posts
    1k Views
    KenedaK
    @mateo_salta said in What does "No reboot needed for 1 week" mean?: (oh, not 'reset' i guess, no data loss, but not a friendly reboot) Ok that's what comes to my mind when i ear reset, so no reset though.
  • Request list for other devices in the device subfolders

    29
    0 Votes
    29 Posts
    10k Views
    LakotaubpL
    @moem Yes that seems to be the problem but things can always be removed. @Peter-Gamma I have taken the liberty to rename the thread slightly to try and stop random posts.
  • Most stable Dual Sim Phone

    Solved
    13
    0 Votes
    13 Posts
    2k Views
    M
    @delijati don't give up!
  • Video playback mp4 on UBUNTU TOUCH?

    mp4 video
    8
    1 Votes
    8 Posts
    2k Views
    T
    @kyrylo welcome, however I would not advise getting a galaxy note 4 as my port is very incomplete, its missing call audio and has a few other issues I need to address, but I lack the time to do so
  • Cosmo Communicator: installation without Gemian detour

    2
    1 Votes
    2 Posts
    687 Views
    KenedaK
    @sven said in Cosmo Communicator: installation without Gemian detour: Could somebody create a Planet subcategory and move my post and others there? That would help ... Agree
  • Yu Black (garlic)

    7
    4 Votes
    7 Posts
    2k Views
    A
    @darkcoder221 No, sorry. The port is currently in need of some work as the last bootable image failed to wake for phone calls. I am currently unable to put any time into fixing this.
  • Moto G 2013 (falcon)

    3
    2 Votes
    3 Posts
    775 Views
    KuatoK
    @fsi any test build? I have XT1033 and I want to test it
  • Zuk z2_plus

    11
    4 Votes
    11 Posts
    3k Views
    SamirS
    Is the port still under development @SALPHA ?
  • Motorola Moto E 2015 4G/LTE (surnia)

    1
    1
    1 Votes
    1 Posts
    2k Views
    No one has replied