Hi All, It has been a while with no update here on my side, i do not consider the Pro5 usable anymore, especially professionally, and currently testing a Fairphone 2 and a Nexus 5 for which the signal is definitively better. In parallel, when time allows, i have slowly started looking into re-building Halium on Android 7.1 for Meizu Pro5... do not hesitate to ping if you are working on something similar Peace, Tera

Not sure if I should post this here or start a new post as this is VPN-related but maybe a different problem. I’ve also been having difficulties getting VPN working correctly. However, the problem was different to what I’ve seen mentioned in this and other posts about VPN problems. My VPN provider is VyprVPN. First I tried setting things up using the standard VPN GUI, and it seemed to be working. After setting up the details in the GUI, and then flipping the switch, the switch turned green. However, opening a browser and navigating to a site that displays my IP address showed the IP address of my ISP and not my VPN proxy server, so clearly the VPN tunnel was not being used. I installed the enhanced GUI app of Pete Woods and tried using that, but the result was the same. So I resorted to the command line. I hadn’t used openvpn before, so before trying it on the phone I tried it on my Ubuntu 16.04 computer. Using the .ovpn file downloaded from the VyprVPN website, I was able to get the VPN connection working fine with sudo openvpn Config.ovpn on the computer, so I tried the same on my phone. Unfortunately, I got the same result as with the GUI. The connection appears to be established without any errors or warnings in the log, which finishes with ‘Initialization Sequence Completed‘, but checking my IP in a web browser gives the same result as above. Also, closing the connection in the terminal with CTRL+C reported a few errors when trying to delete routes, saying RTNETLINK answers: No such process, ERROR: Linux route delete command failed: external program exited with error status 2. After a lot of searching, I inserted the line ‘route-delay 5’ at the end of my config.ovpn file and this solved the problem. The forum where I found the suggestion didn’t give much explanation, so I am not sure what the exact problem was or why this solves it. I’m certainly no expert in openvpn. Sorry for the long post, but hopefully this may help anyone else having a similar problem or maybe the Ubports developers working on the VPN gui app. I can post log files if anyone wants.

that guest that initially made this topic was me. it was a new account and i was able to get back into my older account which is what i'm using now. ok, i'll check those links to see what i can do. thanks!

Ok. I have the installer talking to the phone. I have created a folder "c:\platform-tools" which contains adb and fastboot etc from google. I have copied the installer into the same directory and added the directory to PATH enviroment variable. Now when I run the installer it works as expected until I run up against a bug. The install now fails with an "Adb push error". I found the install log and the reason the push fails is because of a forward slash in the file name. I found the bug report and commit expected to fix it. I guess I'll have to wait until the next release of the installer.

Thanks for the quick answer @advocatux. My battery is not running out too fast, the problem lies in the fact that UT does not show current battery level, and I do not know if the phone is charging when connected to a laptop. The cable is rather fine, because when I turn off the phone and connect to the charging cable the phone shows that it is charging, but when it is turned on it does not show. In the link you provided to me, I did not find any solution :(, unless you suggest that I install the Devel version of the UT. I just forgot to add that I have 15.04 stable UT, I did not manage to notice whether this problem occurred from the moment of installing UT, or after some of my interference in the UT. My only intervention in the system was after useing the tutorial contained in this link https://forums.ubports.com/topic/1015/howto-opo-fix-mtp-driver-permissions, which on the occasion helped me to solve my problem ( Thanks to @Flohack). p.s. sorry for my bad english xD p.s. 2 I made this screen shoot this morning, and when UT was switch off, phone shows on the screen the battery is charged in 100%, but UT still showing 50% [image: 1521271950720-screenshot20180317_072705972-resized.png] Little update: I also noticed that UT constantly monitors the battery level, because over time it reduces the brightness of the screen. The question is why GUI stopped at 50% and does not want to update itself, since UT itself knows what is the current level of battery. After reboot system is working Ok, i don't know what caused the problem.

@arpi Well done, should of thought of that one myself (bit early for my brain function). Enjoy ubports.

I'm delighted to be able to report that I've finally got NextCloud working on my Nexus 5, and I really couldn't be happier. Thanks for all the support, especially from the Telegram UBPorts Clouderama group - in particular Wayne(OutThere) and Amolith Seregoin. This really is a very able and supportive community.

@snappy sure would be nice to have more devices supported though. We have a J5 knocking around here and to be able to move that to UBPorts would be the better option, than staying with its old os.

Having trouble getting content to appear in the open store app. Just seeing blank page. It works mostly when I am on wifi, but rarely when using mobile data. I have no trouble reaching the open store through the UT web browser.

@bruno said in BQ Aquaris M10 HD won't turn on [solved]: h am android package cause BQ don't provide an ubuntu package for the HD edition anymore. Afterwards i could reflash the device back to UT by using the UBPorts installer! Now i'm glad to have a running device and i stricktly avoid to power it down... Btw: after reflashing to android the battery power was only 1%. This after shutdown only 48h before. So the shutdown was defintly incomplete and the device drained the battery strongly. My question now: is this a BQ problem? Or is it a UT bug? I think your battery was drained just in time when you plugged it in. When that happened to me i could not connect it to my computer. Your reflash was most likely not necessary. Bug is with UT. Never happened to me when i used Android.

Same here. UT 15.04 OTA-3 on a Nexus 5 is now my only working phone. I haven't had this happen to me yet. If nothing else works, possibly just a re-install of the image? I had bugs with my sim card that went away completely after my 2nd install. It's been bothering me, but I honestly have no clue what/if I did anything differently the 2nd time around. I guess repeating tasks with expectation of different results pays off for some of us... The issue hasn't returned since.

I would file this as issue in the installer tracker, the forum is probably a too slow place for that: https://github.com/ubports/ubports-installer/issues - and check before if its not a duplicate BR

@marathon2422 should be bootloop,

@domubpkm said in LIFESPAN BQ 4.5 BATTERY: @manolollr what's you say is very interesting, thanks for your comments. I think so there is no battery draining when phone is in sleep mode. I'm only a user but i think maybe there is a lot of battery draining when CPU or processor meet a defined temperature, a threshold, when it become warm. And when we go to internet, the processor become more quickly warm than if we use a 'basic' app. I notice that. Is there a command on terminal to see the processor temperature ? Have a look at $ ls -l /sys/devices/platform/battery/power_supply/battery/ ... $ cat /sys/devices/platform/battery/power_supply/battery/batt_temp 250 $ cat /sys/devices/platform/battery/power_supply/battery/batt_vol 4220 matthias

@hudson said in I need you ! from France !!! Scopes ??: Thank you for your answers @alan_g : I know for a fact that I am not a consumer but I will like to find scopes today and news for example. It would be necessary to find the sources and to be able to install them on the terminal. But is it possible? I don't have knowledge of the details, but the code is open source so you can find it, build it, package it and deploy it. If you can get it working you should also upload it to the open store so that others can benefit too. The folks around here will guide you with each step along that path. I contacted canonical and the former developers of the scope Today but for now no response from them. The team at Canonical was disbanded a year ago and most of the developers now work elsewhere. What I found ideal in this system was precisely the scope system.guide Then that's the one to start with! Now I'm sorry, but I find that the terminal looks without these scopes to an old android. Maybe I have to develop it myself. I will keep you informed of the evolution of my reflection. Good luck!

Yep - and l've now got Telegram installed on my desktop too ... certainly might come in handy!

Thx mates, I tried to make a eMMC reset & it stuck during startup, this device is getting on a slippery slope... I'll probably indulge myself w/ a Meizu Pro 5 as the android container project looks very promising... Thanks a load for all the support though !

Found the solution: adb reboot bootloader Then boot it into recovery and then: ubuntu-device-flash touch --device=mako --server=http://system-image.ubports.com --channel=15.04/stable This ends with: 2018/02/26 21:42:20 error pushing: adb: error: connect failed: no devices/emulators found But after rebooting it it is up and running 15.04 without any problems Sorry for not trying harder before posting above!

@advocatux It was already turned on. Seems it is just something to do with the two step thing. I turned it on ages ago to get dekko2 working when it first came out.